The Eramosa series is a color body porcelain that is produced to emulate a veined limestone. The unbelievable similarities between this product and actual limestone were made possible due to new, digital, inkjet technology. Eramosa is available in three sizes, plus a 2”x2” Basketweave and Stack. Because this material is a porcelain product, minimal maintenance is required. Numerous patterns can be created with the available sizes. It is important to note that there is a slight difference in thickness between the 6”x36” and 12”x24” size. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected.
For proper bonding, medium mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required. Grout release is recommended for the polished finish, prior to grouting so grout powders do not fill pores in the tile surface, which can attract dirt when walked upon. This series is suitable for residential and commercial applications.