Pietra Italia

*The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.
 

Product Type:

Rectified Through Body Porcelain

Made in Italy

Colors:

Beige
Black
Grey
White

Sizes:

12"x24"x10mm
24"x24"x10mm
24"x48"x10mm
*12"x24"x10mm R11 Anti-Slip
*24"x48"x10mm R11 Anti-Slip (Beige Only)
Beige/White Stack (0.93 sq ft sheet)
Black/Grey Stack (0.93 sq ft sheet)
2"x2"x10mm Mosaic

Stocked Trim:

3"x12" SBN

Stocked Finishes:


Standard
*R11 Anti-Slip Finish (12"x24" only)

Pietra Italia is a rectified through body porcelain that emulates a limestone. It provides a clean, natural stone look to any environment. It is available in two sizes. Because this material is a porcelain product, minimal maintenance is required. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required. Pietra Italia is available in two finishes: Standard Finish and R11 Anti-Slip Finish. The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.


Staggered Line Art 33%
Commercial
Residential
Interior Floor
Exterior Floor (R11 Anti-Slip Finish Recommended)
Countertops
Interior Wall
Exterior Cladding
Fireplaces
Showers
Shower Floors (R11 Anti-Slip Finish, 2"x2" Mosaic, and Stacks only)
Steam Showers
Pool & Spa (waterline)

DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application. 
Pietra Italia Tech Specs
DCOF rating is a measurement of a tile's frictional resistance. It is the specifier's responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally-recognized testing.

P.E.I. Rating: 4

Safety Data Sheet (SDS)
Product Details
*The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.
 

Product Type:

Rectified Through Body Porcelain

Made in Italy

Colors:

Beige
Black
Grey
White

Sizes:

12"x24"x10mm
24"x24"x10mm
24"x48"x10mm
*12"x24"x10mm R11 Anti-Slip
*24"x48"x10mm R11 Anti-Slip (Beige Only)
Beige/White Stack (0.93 sq ft sheet)
Black/Grey Stack (0.93 sq ft sheet)
2"x2"x10mm Mosaic

Stocked Trim:

3"x12" SBN

Stocked Finishes:


Standard
*R11 Anti-Slip Finish (12"x24" only)
Product Information

Pietra Italia is a rectified through body porcelain that emulates a limestone. It provides a clean, natural stone look to any environment. It is available in two sizes. Because this material is a porcelain product, minimal maintenance is required. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required. Pietra Italia is available in two finishes: Standard Finish and R11 Anti-Slip Finish. The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.


Staggered Line Art 33%
Recommended Uses
Commercial
Residential
Interior Floor
Exterior Floor (R11 Anti-Slip Finish Recommended)
Countertops
Interior Wall
Exterior Cladding
Fireplaces
Showers
Shower Floors (R11 Anti-Slip Finish, 2"x2" Mosaic, and Stacks only)
Steam Showers
Pool & Spa (waterline)

DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application. 
Tech Specs
Pietra Italia Tech Specs
DCOF rating is a measurement of a tile's frictional resistance. It is the specifier's responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally-recognized testing.

P.E.I. Rating: 4

Safety Data Sheet (SDS)