Faro

Faro

Select from product options below to view larger images and installation photos.
Clear
Product Brochure

Order a sample

$5.00

Orders placed Monday-Friday will be processed within 48 hours.

Disclaimer: Samples are only available to be shipped to: AZ, CA, CO, HI, ID, MT, NV, NM, OK, OR, TX, UT, WA, WY.

Product Details

Product Type:
Rectified Glazed
Color Body Porcelain
Digital Print Technology

PRODUCT CONTAINS
≥30% PRE-CONSUMER
RECYCLED CONTENT

Stocked Colors:
Faro Beige
Faro Bianco
Faro Silver
Faro Taupe Grey

 

Stocked Sizes:
12 x 24
24 x 48
2 x 2 Mosaic Mesh (0.9588 sf/sht)

Stocked Trim:
3 x 12 Surface Bullnose

Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa

*2 x 2 Mosaic Mesh Only

DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

More Information

The Faro series is an Italian-made glazed color body porcelain tile available in four neutral colors. Created using digital print technology, Faro offers an organic aesthetic to your environment with soft patterning and subtle veining featured across the surface of each color.   

Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. Because this material is a porcelain product, minimal maintenance is required.  

For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

Tech Specs

 

TECHNICAL CHARACTERISTICS NORM EXPECTED LIMIT VALUES TYPICAL VALUE
DYNAMIC COEFFICIENT OF FRICTION ANSI A137.1:2019 DYNAMIC WET ≥ 0.42 DYNAMIC WET ≥ 0.42
VISIBLE ABRASION RESISTANCE UNI EN ISO 10545-07 REQUIRED RESISTANT
CHEMICAL RESISTANCE UNI EN ISO 10545-13 REQUIRED RESISTANT
FROST RESISTANCE UNI EN ISO 10545-12 REQUIRED RESISTANT
WATER ABSORPTION UNI EN ISO 10545-03 ≤ 0.5% ≤ 0.5%
BREAKING STRENGTH UNI EN ISO 10545-04 ≥ 35 N/mm²  ≥ 35 N/mm²

DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

Safety Data Sheet (SDS)

Visit The Slab Yard

Browse our products online or in-person.
Online Inventory

BRING YOUR IDEAS TO LIFE

Design a one-of-a-kind tile or create your custom space.
Just Imagine

Showroom Experience

See and touch extraordinary, hand selected surfaces.
Store Locations

You may also like