Lagos

Lagos

Select from product options below to view larger images and installation photos.
Clear
Product Brochure

Order a sample

$5.00

Orders placed Monday-Friday will be processed within 48 hours.

Disclaimer: Samples are only available to be shipped to: AZ, CA, CO, HI, ID, MT, NV, NM, OK, OR, TX, UT, WA, WY.

Product Details

Product Type:
Rectified Color Body Porcelain
Digital Print Technology

Stocked Colors:
Lagos Concrete
Lagos Ivory
Lagos Light Grey
Lagos Mud
Lagos Sand

Stocked Sizes:
12 x 24
24 x 48
4 inch Hex Mesh (0.86 sf/sht)
2 x 2 Mosaic Mesh (0.9588 sf/sht)

Stocked Trim:
3 x 12 Surface Bullnose

Special Order Items: These items are subject to longer lead times and possibly minimum order quantities. Please contact your Sales Representative or any Arizona Tile location for more details.

Special Order:
24 x 36 x 2cm Paver R11 Anti-Slip Finish (Light Grey color only)

Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa

*2 × 2 Mosaic Mesh and 4 inch Hex Mesh Only

DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

More Information

The Lagos series is an Italian-made rectified color body porcelain. Created using digital print technology, its pattern mimics the look of natural limestone, enhancing its organic appearance. Given the wide selection of color options available in the series, Lagos offers the timeless appeal of natural stone with the practical properties of porcelain tile. Unlike limestone, minimal maintenance is required. Clean, rectified edges accommodate narrower grout joints thereby giving the illusion of an uninterrupted, honed surface.

Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture, and calibration differences should be expected. This series is suitable for residential and commercial applications.

For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

Tech Specs

 

TECHNICAL CHARACTERISTICS NORM EXPECTED LIMIT VALUES TYPICAL VALUE
DYNAMIC COEFFICIENT OF FRICTION ANSI A137.1:2012 DYNAMIC WET ≥ 0.42 DYNAMIC WET ≥ 0.42
VISIBLE ABRASION RESISTANCE ISO 10545-06 ≤ 175mm³ RESISTANT
CHEMICAL RESISTANCE ISO 10545-13 REQUIRED RESISTANT
FROST RESISTANCE ISO 10545-12 REQUIRED RESISTANT
WATER ABSORPTION ISO 10545-03 ≤ 0.5% ≤ 0.1%
BREAKING STRENGTH ISO 10545-04 ≥ 35 N/mm² 45.6 N/mm²

DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

Safety Data Sheet (SDS)

Visit The Slab Yard

Browse our products online or in-person.
Online Inventory

BRING YOUR IDEAS TO LIFE

Design a one-of-a-kind tile or create your custom space.
Just Imagine

Showroom Experience

See and touch extraordinary, hand selected surfaces.
Store Locations

You may also like