Themar

Themar

Select from product options below to view larger images and installation photos.
Clear
Product Brochure

Order a sample

$5.00

Orders placed Monday-Friday will be processed within 48 hours.

Disclaimer: Samples are only available to be shipped to: AZ, CA, CO, HI, ID, MT, NV, NM, OK, OR, TX, UT, WA, WY.

Product Details

Product Type:
Rectified Glazed Porcelain
Digital Print Technology

PRODUCT CONTAINS
≥20% PRE-CONSUMER
RECYCLED CONTENT

Stocked Colors:
Themar Bianco Lasa
Themar Crema Marfil
Themar Grigio Savoia
Themar Statuario V
Themar Venato Gold

Stocked Finishes:
Matte
Polished

Stocked Sizes:
3 x 12
12 x 24
24 x 24
2 x 2 Mosaic Mesh
(0.9588 sf/sht)
2-3/8 x 2-3/8 Hex Mesh
(0.72 sf/sht)

Stocked Trims:
1/2 x 11-5/8 Pencil Bullnose
3 × 12 Surface Bullnose

Recommended Uses:
Commercial
Residential
Interior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
*Shower Floors
Steam Showers
Pool & Spa

*Matte 2 x 2 Mosaic Mesh and
Hex 2-3/8 Mesh Only

DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

More Information

The Themar Series is a rectified glazed porcelain. Digital print technology creates some of the same characteristics as some of the most sought-after natural stones, including marble. Because this material is a porcelain product, maintenance risks involved with actual stone are eliminated. There will be noticeable variations in color and movement between pieces. Therefore, it is important and recommended that a range of this product be viewed before finalizing a purchase.

Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. This series is suitable for residential and commercial applications.

Grout release is recommended for the polished finish, prior to grouting so grout powders do not fill pores in the tile surface, which can attract dirt when walked upon. It is recommended to use a coordinating grout color for all polished porcelain, contrasting grout colors are not recommended. For proper bonding, LHT/LFT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

Tech Specs

 

TECHNICAL CHARACTERISTICS NORM EXPECTED LIMIT VALUES TYPICAL VALUE
DYNAMIC COEFFICIENT OF FRICTION ANSI A137.1:2012 DYNAMIC WET ≥ 0.42 DYNAMIC WET MATTE ≥ 0.42

DYNAMIC WET POL. N/A

VISIBLE ABRASION RESISTANCE UNI EN ISO 10545-06 REQUIRED RESISTANT
CHEMICAL RESISTANCE UNI EN ISO 10545-13 REQUIRED RESISTANT
FROST RESISTANCE UNI EN ISO 10545-12 REQUIRED RESISTANT
WATER ABSORPTION UNI EN ISO 10545-03 ≤ 0.5% ≤ 0.1%
BREAKING STRENGTH UNI EN ISO 10545-04 S ≥ 1300 N

R ≥ 35 N/mm²

S COMPLIANT

> 40 N/mm²

DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

P.E.I. RATING: 4

Safety Data Sheet (SDS)

Visit The Slab Yard

Browse our products online or in-person.
Online Inventory

BRING YOUR IDEAS TO LIFE

Design a one-of-a-kind tile or create your custom space.
Just Imagine

Showroom Experience

See and touch extraordinary, hand selected surfaces.
Store Locations

You may also like