- Product Details
- More Information
- Tech Specs
Rectified Through Body
R11 Anti-Slip Finish
The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.
12 x 24 x 10mm
24 x 24 x 10mm
24 x 48 x 10mm
12 x 24 x 10mm R11 Anti-Slip
24 x 48 x 10mm R11 Anti-Slip
Beige/White Stack (0.93 sq ft sheet)
Black/Grey Stack (0.93 sq ft sheet)
2 x 2 x 10mm Mosaic Mesh
3 x 12 x 10mm Surface Bullnose
Pool & Spa (waterline)
*R11 Anti-Slip Finish Recommended
**R11 Anti-Slip Finish, 2 x 2 x 10mm Mosaic, and Stack Mosaics only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Pietra Italia is a rectified through-body porcelain that emulates limestone. It provides a clean, natural stone looks to any environment. It is available in two sizes. Because this material is a porcelain product, minimal maintenance is required. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture, and calibration differences should be expected. This series is suitable for residential and commercial applications. For proper bonding, medium bed mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required. Pietra Italia is available in two finishes: Standard Finish and R11 Anti-Slip Finish. The R11 Anti-Slip Finish is specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.
DCOF rating is a measurement of a tile’s frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally-recognized testing.
P.E.I. Rating: 4