Poplar White Satin

Poplar White Satin quartzite is from a bedrock quarry in Brazil. This beautiful cream and grey toned stone has gold veining throughout. This is a metamorphic stone which evolved from a sandstone due to extreme heat and pressure. Due to the qualities of the stone, the slabs are book-matched; meaning slab one and slab two will be cut and brushed to create a mirror image of each other. These are then kept in sequence, which allows for a consistent flow in pattern.

As a natural stone product, it is recommended that this be sealed to extend its longevity. Natural stone may absorb moisture during fabrication and from installation materials. Therefore, it is recommended that sealing should be done after the stone has fully dried to ensure proper sealer absorption, and prior to consumer use. Drying time will vary depending on the stone, as well as the temperature and humidity level. Quartzite has a more open structure and therefore needs a sealer that is designed to penetrate properly to ensure that the stone is sealed. After sealing, allow it to cure completely. Arizona Tile recommends applying multiple coats of a solvent-based impregnating sealer, allowing each coat to fully absorb and dry before applying the next, until the natural stone is fully saturated and no longer absorbs the sealer. Ongoing maintenance sealing should be performed as needed based on the stone’s absorption rate, exposure, and use. It’s also recommended to seal all cut edges, on-site at the time of installation. This will help to minimize water and oils from penetrating into the stone around sinks, faucet holes, ovens and any seams.

California Residents: Information about Proposition 65 can be found in FAQs.

Safety Data Sheet (SDS)