The inspiration for Unica, a rectified through body porcelain, was a stone that doesn’t exist in nature, taking sedimentary stones like limestone and other minimalistic stones, and adding veining of a basic marble. Unica is a rectified porcelain available in Matte and R11 Finish. The R11 Finish is slip-resistant and specifically designed for outdoor, exposed areas, as well as wet applications, including shower floors.

Piece to piece variation in shade or color are inherent in all fired clay products: therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. This series is suitable for residential and commercial applications. Because this material is a porcelain product, minimal maintenance is required.

For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.

DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.

The above result is for the Standard Finish. The testing for R11 finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 finish. To be certified as R11, a tile must pass internationally-recognized testing.

Safety Data Sheet (SDS)