Product Type:
Rectified Color Body Porcelain
Digital Print Technology
Salento
Salento
Select from product options below to view larger images and installation photos.
- Product Details
- More Information
- Tech Specs
Product DetailsMore InformationTech Specs
Stocked Colors:
Salento Beige
Salento Bianco
Salento Grigio
Salento Visone
Stocked Finishes:
Matte
R11 Finish 
The Outer Limits® Collection includes flooring products designed for outdoor living, featuring slip-resistant porcelain tiles and countertop materials ideal for outdoor kitchens and exposed environments. Please confirm which exterior surface(s) a product is recommended for in the Recommended Uses list to the right.
Stocked Sizes:
12 x 24
24 x 48
24 x 48 R11 Finish
24 x 48 Structured (Wall Only)
Stocked Trim:
See Below
Coming Soon:
2 x 2 Mosaic Mesh (0.9684 sf/sht)
2″ Penny Round Mesh
(0.85 sf/sht)
4″ Hex Mesh (1.119 sf/sht)
3 x 12 Surface Bullnose
Recommended Uses:
Commercial
Residential
Interior Floor
*Exterior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
**Shower Floors
Steam Showers
Pool & Spa
*24 x 48 R11 Finish Only
**2 x 2 Mosaic Mesh, 2″ Penny Round Mesh, 4″ Hex Mesh and 24 x 48 R11 Finish Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The Salento series is an Italian made porcelain tile. Created using digital print technology, Salento has the overall look of a natural limestone with subtle organic inclusions and veining. Because this material is a porcelain product, minimal maintenance is required. This series is suitable for residential and commercial application.
Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected.
For proper bonding, LHT/LFT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A326.3 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | ISO 10545-06REQUIRED | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | ISO 10545-13 | REQUIRED | RESISTANT |
| FROST RESISTANCE | ISO 10545-12 | REQUIRED | RESISTANT |
| WATER ABSORPTION | ISO 10545-03 | ≤ 0.5% | ≤ 0.1% |
| BREAKING STRENGTH | ISO 10545-04 | ≥ 1300 N | ≥ 1300 N |
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Finish. To be certified as R11, a tile must pass internationally recognized testing.
Installation Gallery
