Konkrete
Konkrete
- Product Details
- More Information
- Tech Specs
Product Type:
Rectified Color Body Porcelain
Digital Print Technology
Stocked Colors:
Konkrete Beige
Konkrete Bianco
Konkrete Cenere
Konkrete Grigio
Stocked Finishes:
Matte
R11 Anti-Slip Finish
Stocked Sizes:
12 x 24
24 x 48
24 x 48 R11 Anti-Slip Finish
2 x 2 Mosaic Mesh (0.9588 sf/sht)
Stocked Trim:
3 x 12 Surface Bullnose
Special Order Items: These items are subject to longer lead times and possibly minimum order quantities. Please contact your Sales Representative or any Arizona Tile location for more details.
Special Order:
24 x 24 x 2cm Paver R11 Anti-Slip Finish
24 x 48 x 2cm Paver R11 Anti-Slip Finish
40 x 40 x 2cm Paver R11 Anti-Slip Finish
Recommended Uses:
Commercial
Residential
Interior Floor
*Exterior Floor
Interior Wall
Exterior Cladding
Fireplaces
Shower Walls
**Shower Floors
Steam Showers
Pool & Spa
*24 x 48 R11 Anti-Slip Finish Only
**24 x 48 R11 Anti-Slip Finish and
2 x 2 Mosaic Mesh Only
DCOF Rating (See Tech Specs Tab) is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
Product Video:
The Konkrete series is an Italian-made rectified color body porcelain. Created using digital print technology, its pattern mimics the look of concrete, enhancing its organic appearance. Given the beautiful selection of color options available in the series, Konkrete offers the modern appeal of concrete with the practical properties of porcelain tile.
Piece to piece variation in shade or color are inherent in all fired clay products; therefore, it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture, and calibration differences should be expected. This series is suitable for residential and commercial applications. Because this material is a porcelain product, minimal maintenance is required.
For proper bonding, LFT/LHT mortar for large format and heavy tiles should be used when installing tiles with a dimensional length greater than 15 inches, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required.
| TECHNICAL CHARACTERISTICS | NORM | EXPECTED LIMIT VALUES | TYPICAL VALUE |
|---|---|---|---|
| DYNAMIC COEFFICIENT OF FRICTION | ANSI A137.1:2012 | DYNAMIC WET ≥ 0.42 | DYNAMIC WET ≥ 0.42 |
| VISIBLE ABRASION RESISTANCE | UNI EN ISO 10545-06 | REQUIRED | RESISTANT |
| CHEMICAL RESISTANCE | UNI EN ISO 10545-13 | REQUIRED | RESISTANT |
| FROST RESISTANCE | UNI EN ISO 10545-12 | REQUIRED | RESISTANT |
| WATER ABSORPTION | UNI EN ISO 10545-03 | ≤ 0.5% | ≤ 0.5% |
| BREAKING STRENGTH | UNI EN ISO 10545-04 | > 1300 N | > 1300 N |
DCOF Rating is a measurement of a tiles frictional resistance. It is the specifier’s responsibility to ensure the chosen tile is appropriate for each interior and exterior application.
The above result is for the Standard Finish. The testing for R11 Anti-Slip Finish is static, which is different from the Dynamic Coefficient of Friction (DCOF) test which is a dynamic test. These two tests measure for different and separate results, therefore the DCOF test is not the appropriate test for the R11 Anti Slip finish. To be certified as R11 Anti-Slip Finish, a tile must pass internationally recognized testing.
Installation Gallery
