Eramosa

Product Type:
Color Body Porcelain
Digital Print Technology

Colors:
Eramosa Carbon
Eramosa Clay
Eramosa Ice
Eramosa Natural
Eramosa Sand

Stocked Sizes:
6"x36"x10.6mm Matte Rectified
12"x24"x8.9mm Matte
12"x24"x8.9mm Polished Rectified
2"x2" Basketweave Matte
Stack Matte

Special Order Size:
18"x36" Matte Rectified

Stocked Trim:
3"x12" SBN Matte & Polished

The Eramosa series is a color body porcelain that is produced to emulate a veined limestone. The unbelievable similarities between this product and actual limestone were made possible due to new, digital, inkjet technology. Eramosa is available in three sizes, plus a 2”x2” Basketweave and Stack. Because this material is a porcelain product, minimal maintenance is required. Numerous patterns can be created with the available sizes. It is important to note that there is a slight difference in thickness between the 6”x36” and 12”x24” size. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. 


For proper bonding, medium mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required. Grout release is recommended for the polished finish, prior to grouting so grout powders do not fill pores in the tile surface, which can attract dirt when walked upon. This series is suitable for residential and commercial applications.

Staggered Line Art 33%

Commercial & Residential
Interior & Exterior
Floor & Wall
Backsplashes
Countertops
Fireplaces
Tub Surrounds & Showers
Vanities
Eramosa Tech Specs


DCOF rating is a measurement of a tile's frictional resistance. 
It is the specifier's responsibility to ensure the chosen tile is appropriate for each interior and exterior application.


P.E.I. RATING: 4




Product Details

Product Type:
Color Body Porcelain
Digital Print Technology

Colors:
Eramosa Carbon
Eramosa Clay
Eramosa Ice
Eramosa Natural
Eramosa Sand

Stocked Sizes:
6"x36"x10.6mm Matte Rectified
12"x24"x8.9mm Matte
12"x24"x8.9mm Polished Rectified
2"x2" Basketweave Matte
Stack Matte

Special Order Size:
18"x36" Matte Rectified

Stocked Trim:
3"x12" SBN Matte & Polished

Product Information

The Eramosa series is a color body porcelain that is produced to emulate a veined limestone. The unbelievable similarities between this product and actual limestone were made possible due to new, digital, inkjet technology. Eramosa is available in three sizes, plus a 2”x2” Basketweave and Stack. Because this material is a porcelain product, minimal maintenance is required. Numerous patterns can be created with the available sizes. It is important to note that there is a slight difference in thickness between the 6”x36” and 12”x24” size. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When mixing sizes within a series, shade, texture and calibration differences should be expected. 


For proper bonding, medium mortar should be used when installing tiles with a dimensional length greater than 15”, and rectangular shape and plank tile, per industry standards. Proper thinset coverage is also necessary, and in some cases, back buttering of tile may be required. Grout release is recommended for the polished finish, prior to grouting so grout powders do not fill pores in the tile surface, which can attract dirt when walked upon. This series is suitable for residential and commercial applications.

Staggered Line Art 33%

Recommended Uses
Commercial & Residential
Interior & Exterior
Floor & Wall
Backsplashes
Countertops
Fireplaces
Tub Surrounds & Showers
Vanities
Tech Specs
Eramosa Tech Specs


DCOF rating is a measurement of a tile's frictional resistance. 
It is the specifier's responsibility to ensure the chosen tile is appropriate for each interior and exterior application.


P.E.I. RATING: 4